How to read a tide table

Times, heights and chart datum explained, with the rule of twelfths for the water level in between and the habits that keep beach walks, rock pooling and swims safe.

Updated November 13, 2026

A tide table lists, for one place and one day after another, the time and height of each high and low tide. It looks simple, and it is, once three things are clear: which clock the times are in, what the heights are measured from, and what happens to the water between the listed tides. This guide covers all three and ends with how to use the table at the beach. Our tide times pages follow the same layout, and the guide How tides work explains why the tides behave as they do.

The times

Times are the local time of the place, and they follow the clock change: in summer they are in daylight time. On our pages the time zone is shown next to the times, and the times switch to a 24-hour clock with the °C setting. Because the tide runs on the moon’s day of about 24 hours 50 minutes, each tide usually comes about 50 minutes later than the one a day earlier. That is also why a day sometimes lists only three tides: the fourth has slipped past midnight into the next day.

The heights and chart datum

Heights are measured from a fixed level called chart datum, the zero used on nautical charts of that coast. Different countries choose it differently. In the United States it is Mean Lower Low Water, the average height of the lower of each day’s two low tides over a 19-year period. In Ireland and Britain it is Lowest Astronomical Tide, about the lowest level the tide alone can reach.

Because Mean Lower Low Water is an average, the lowest tides of the month fall below it, and a US table then shows the height with a minus sign. That simply means the water will be lower than usual, which makes those tides the best ones for exploring rock pools. With Lowest Astronomical Tide as the zero, heights are almost never negative.

The difference between a high tide and the next low is the range. A bigger range means the water moves farther and faster: on a coast with a range of 4 m13 ft the shoreline can move hundreds of metres across a flat beach in a few hours.

Between the listed tides: the rule of twelfths

A table gives only the turning points. To estimate the water level in between on a coast with two similar tides a day, sailors use the rule of twelfths. Over the roughly six hours from low to high, the water rises by one twelfth of the range in the first hour, two twelfths in the second, three in the third, three in the fourth, two in the fifth and one in the sixth. The water moves slowly near high and low tide and fastest in the middle.

For a range of 3 m10 ft, the water rises about 0.25 m0.8 ft in the first hour and 0.75 m2.5 ft in the third. Halfway through, it is half the range above the low. The rule is a rough guide: on coasts with mixed or diurnal tides the curve is uneven, and our tide charts draw the predicted curve where the data provider publishes one.

Using the table at the beach

What a table cannot tell you

Tide tables are predictions from astronomy. Wind and air pressure move the real water level: strong onshore wind and low pressure push it above the prediction, sometimes by 1 m3 ft or more in a storm, and offshore wind and high pressure hold it below. The times and heights also change along the coast, and inside bays and estuaries the tide can arrive later and smaller than at the open beach, which is why our pages name the station used and its distance. For boating, always use the official tide tables and charts: a tide table on a website is for planning a day at the beach, not for navigation.